Hot Rod Jim's has sold the TriFive Frame design to our sister shop Nerd Rods. They now have a version of our orignal design that is all CNC Laser cut and is now available in a weld it yourself kit frame version. Check out their site for more info.
www.NerdRods.com

• This is the Kit for the do it yourself people.
• No Major Fabrication
• Nut and Bolt Kit included
• Hot Rod Jim’s replacement arms included
• Click Here for more information

• Bare Frame "Not-Powder Coated" for Custom Mods and Finishing
• C4 Corvette Front and Rear Suspension
• Power Rack and Pinion AC Delco Rebuild
• Rebuilt, Sandblasted and Painted Aluminum Components
• QA1 Coil Over Shocks, your choice Ultra Ride or Proma-Star
• All Grade 8 Hardware
• Click Here for More Information

• Stage 3 or the "Basic" Rolling Chassis
• Frame supplied powder coated
• C4 Corvette suspension remanufactured, refinished and installed.
• 11.5" front and rear brake rotors with single piston calipers.
• This chassis has a 60.5" wide suspension, only .5" wider than stock.
• Only requires a 15” wheel to clear the disk brakes.
• Click here for information on the “Basic” rolling chassis with QA1 coil over shocks.
• Click here to learn about the softer lower “Basic” with Air Ride Technologies Shockwaves.

• Stage 4 or "Grand Sport" Chassis.
• Powder coated frame and refinished aluminum parts.
• Wider Suspension with better suspension geometry.
• Requires deep wheels found on almost every GM sport car from 1988 and up.
• 13" front rotors with 2 piston calipers 12" rear rotors with 1 piston calipers.
• All Grand Sport Chassis have the “Corvette Logo” on the front calipers.
• Requires 17" rims to clear the calipers.
• Click here to learn more about the "Grand Sport" with QA1 Ultra Ride coil over shocks
• Click here to learn more about the "Grand Sport" with Air Ride Technologies Shockwaves.

• Stage 4 or "C4 Z06"
• Uses the C4 suspensions and brakes from the 2006 and up C6 Z06 Corvette.
• This chassis look like a Z06 Corvette but without the expensive modifications.
• Front 14” Rotors and 6 Piston Calipers Rear 13.6” Rotors and 4 Piston Calipers
• All Calipers come with Corvette Logos.
• The Z06 chassis requires at a minimum of 18” wheels to clear the calipers
• The Z06 requires wheels with 2-3 inches of back spacing
• Click here to learn more about the "Z06" with QA1 Ultra Ride coil over shocks
• Click here to learn more about the "Z06" with Air Ride Technologies Shockwaves.

Click here to go to the Upgrades Page for the TriFive Chassis